My Light Diagram

The following diagram is an inverter circuit which will give you 220V AC 50Hz with maximum power of 100W. This inverter built using transistors both the square wave generator and the amplifier.The Q1 and Q2 used generate square wave. Q5-Q8 amplify the signal and the transformer to increase the AC/square wave current from 12VAC to 220V AC 50HZ. 100W Inverter 12VDC to 220VAC circuit diagram Inverter PCB layout

This is the Simple 100W inverter 12V to 220VAC Circuit Diagram 2. To lower or raise any specific voltage is better adapted from a transformer, but this component does not operate in direct current, which is available in battery or vehicle. Therefore we must put an oscillator that generates an alternative current. The Integrated circuit (CD4047) is an oscillator that has the output inversely to one another. This means that while if one is high, other states are low and vice versa. The signals are too weak to drive the transformer so that the driver applied consists from three transistors in the chain. Diode in parallel with the end of each transistor prevent reverse current produced by removing the coil current that can burn the transistor. 5A diode placed in parallel with the power line creates a short circuit when the polarity is accidentally reversed, causing the fuse to skip. The 50K preset adjusts the oscillator frequency, which is directly proportional to the frequency of the AC p...