My Light Diagram

Simpleclock is an easy to assemble attractive 4-digit 7-segment LED display clock with temperature and alarm function. It is available in three display colors: Red, Blue and White. It comes as a kit of through-the-hole parts and can be soldered by any person with basic soldering experience. An attractive acrylic stand is included. [ ]

MEGMEET MLT666A  SEMA04TA069C2 CLICK ON THE SCHEMATICS TO ZOOM IN

Advantages and Disadvantages of LCD Advantages: 1.        Low power consumption 2.        Small voltage requirement 3.        They are economical 4.        Good contrast in display Disadvantages: 1.        Sometimes the output of the LCD is not visible clearly 2.        They are not very reliable 3.        Slow operation 4.        occupies large area 5.        They are very sensitive, damage by over voltage or over current 6.        They have limited temperature range 7.        In LCD a.c sequence wave drive of frequency less than 50 Hz is employed. Applications of LCD 1.        Display unit in calculators 2.    ...

LCD; Moving Display & Custom Character : You can display your custom characters by using mikroc custom character tool. Go to tools>>customer character then make the character you want to display. After this click on 'generate code'. It will generate a customchar function just copy and paste above the main function. customchar has two parameters; row and position in that row. Just pass these parameters where you want to see your custom character on LCD. You can also move the text, left and right, on LCD screen; by using the LCD commands. _LCD_SHIFT_LEFT and   _LCD_SHIFT_RIGHT are the commands. There are various other commands in mikroc, i forget to tell you in lcd tutorial, these are: LCD Commands Now lets write a code to display and move the custom character, back and forth, (of your choice) on LCD screen. Code: // LCD module connections sbit LCD_RS at RB4_bit; sbit LCD_EN at RB5_bit; sbit LCD_D4 at RB0_bit; sbit LCD_D5 at RB1_bit; sbit LCD_D6 at RB2_bit; sbit LCD_D7 ...

Volt meters & ampere meter with PIC can be used to measure voltage and current simultaneously. The series of volt meters & ampere meter with PIC16F876A PIC is used as a data processor voltage and current are measured.  This circuit uses the viewer in the form of 16 × 2 LCD used for the data display voltage and current measurements. In the article volt meter and ampere meter with PIC are discussed kerannya limited to devices only. More detail can be seen from the image sequence volt meter and ampere meter with PIC below.  The images of Volt Meter & Ampere Meter With PIC Circuit Volt meters & ampere meter with PIC  

Introduction: When you write an LCD Program to write your name or any text, you can only display the same text at all times. If you have to change the text, you have to change the code, recompile it again and then reprogram it. Instead of doing all this, you can just connect your circuit to serial port of computer and change the text on LCD instantly using the hyperterminal of the PC. You can just type any text in the hyperterminal and press ENTER key. The text will be displayed on the LCD instantly. You can customize the display by changing the pattern. AVR GCC CODE /* Purpose:It will take input from the terminal and writes that on LCD Hardware: ATmega8 @ 16MHz PC Software : Hyper terminal @ 19200 baud No Parity,1 Stop Bit, Flow Control = NONE */ #include #include #include #include #include "uart.h" #include "lcd.h" static int uart_putchar( char c, FILE *stream); static FILE mystdout = FDEV_SETUP_STREAM(uart_putchar, NULL, _FDEV_SETUP_WRITE); sta...