Push Button Switch De Bouncer
This circuit will remove the transient spikes and contact bounces from a non-latching push button switch. Push Button Switch De-Bouncer Circuit Diagram : Notes: Using a 555 timer as a monostable circuit, it is easy to build a good switch debouncer circuit. There are many circuits for SPDT debouncing, but not many for a normally open, push-to-make press button switch (PBS). The 555 monostable gives an output pulse of around 20 msec with component values shown. The formula for determining the output pulse is: t out = 1.1 R 1 C 1 With the values in my circuit this equates to: t out = 1.1 x 1.8x10 6 x 10x10 -9 = 0.0198 sec or 19.8ms The 555 circuit can be re-triggered if the input is held low longer than the output pulse. To prevent this happening, I have included a further timing circuit comprised of the 1Meg resistor and 47n capacitor. Normally, the 47n capacitor is discharged via the 1 Meg resistor. When the switch is pressed the capacitor quickly charges and provides a b...