My Light Diagram

The following display features eight 7-segment displays arranged in two rows of four digits. The on-board MAX7219 driver enables you to easily add eight 7-segment LED displays to your project using only 3 I/O pins of microcontroller. The major advantage of using this board is the time-division multiplexing operations required for continuous refreshing of the display digits are performed by the MAX7219 chip, thereby keeping the microcontroller free for doing other pressing tasks. It is suitable for displaying two variable values simultaneously in a project, such as displaying temperature and humidity, or current and voltage, etc. [ ]

Hiii…….friends today I am here with a very interesting projects for those who have just started with electronics. With this project we can display 0-9 digits on the 7 segment and we can count the no of persons entering in a room.  Circuit Diagram Here a counter IC 7490 is used along with BCD to 7 segment decoder IC 7447. The function of 7490 is to provide the counting value and decoder IC is decoding that value to 7 segment output . Every time when you will push the switch the clock of IC7490 will be triggered and as a result count will increase by 1 . Hence with this simple project we can display numbers 0 to 9 on seven segment display just by pressing switch. It’s a very easy circuit and you can easily implement it on a general purpose PCB . NOW ITS TIME TO MAKE USE OF THIS CIRCUIT IN COUNTING THE NUMBER OF PERSONS ENTERING IN THE ROOM...... LETS SEE HOW….?? So instead of using switch we will use LDR here , we will place LDR at the entry door in such a manner that the shadow of t...

The aim of this article demonstrate how the Arduino can run on 7-segment display.   We used a SA56-11GWA which is a single display with common anode, it means that the anode is common to all digits, and to the point. A display consists of 8 LEDs, 7 form the figure and 1 point decimal.A conversion between decimal and what we intend to show the binary information that you receive is called the BCD (Binary Coded Decimal). In terms of hardware, each LED work individually, so each of the segments has to lead a limiting resistor, in this case, each digit has an operating voltage of 2.2V and consumes 20mA.   If the voltage is 5volts, we need the resistor fall 5-2.2 = 3.8V, by Ohm's Law we can calculate, R = V  res  / I  led  R = 3.8 / 0.020 = 190 Ω +/- 20% (let's use a resistor with 220Ω).   This applies to this display SA56-11GWA used as an example, other values ​​may be different, it is useful to calculate the required resistance value. Decimal The A  ...